top of page

PKRD 240 a PKRD 260 Double shaft ripping saw

The machine is intended for lengthwise cutting of prisms - ripping into precise sawn timber with a high quality of the cut surface. The machine is designed for use in the most demanding operations - high operational speed in connection with high thickness of the ripped material.

The machine is equipped with two fixed ripping sleeves (an upper one and a lower one) for fixing of saw discs. A saw blade suspension with maximum span between the peripheral saws amounting to 660 mm is constructed by means of intra-saw inserts. The height of saw shafts is adjustable which makes it possible to choose optimum sawing conditions for each of the shafts. Height adjustment is carried out by means of an electronic motor and a gearbox.

The sturdy frame of the machine is welded from high quality steel sheets and profiles. The system of feeding of the material consists of three toothed lower cylinders against which there are two upper thrusting cylinders. On the output side, the machine is equipped with a lower chain with transverse drive dogs against which there are two upper thrusting cylinders. The upper cylinders are controlled hydraulically. Saw shafts are propelled by means of special V-belts which are equipped with a safety cover. The machine is equipped with two lines of upper backward projection retainers. The movable parts of the machine are covered and if the covers are open, the machine cannot be turned on. The large hole in the lower section of the machine provides for efficient waste removal.

The delivery includes a well organised control board and an electric switchboard.
The machine has been approved by the governmental testing institution and it complies with all relevant EU regulations.

stroje-rada-PKRD_01_big.jpeg
stroje-rada-PKRD_02_big.jpeg

Passage width

PKRD 240 800mm

PKRD 260 800 mm

​Diameter of saw shafts

PKRD 240 110 mm

PKRD 260 110 mm

The diameter of the spacers

PKRD 240 208 mm

PKRD 260 208 mm

​Weight without main engine

PKRD 240 9 500 kg

PKRD 260 10 500 kg

​Maximum cutting height

PKRD 240 240 mm

PKRD 260 260 mm

The diameter of the saw blades

PKRD 240 460 mm

PKRD 260 500 mm

​Feed (depending on design)

PKRD 240 5-45 m/min

PKRD 260 5-45 m/min

​Maximum sweep width

PKRD 240 660 mm

PKRD 260 660 mm

The diameter of the hole of the saw blade

PKRD 240 150 mm

PKRD 260 150 mm

The power of the main engine

PKRD 240 2 x 75 - 132 kW

PKRD 260 2 x 100 - 160 kW

Documents for download

Scheme PKRD 260

PDF Document

Execution scheme

PDF Document

bottom of page